<6>Booting Linux on physical CPU 0x0
<6>Initializing cgroup subsys cpu
<5>Linux version 3.18.20-SVN:11255 (jenkins@4c13131979fe) (gcc version 4.9.4 20150629 (prerelease) (Hisilicon_v600_20170329) ) #1 SMP Fri Feb 28 20:55:12 CST 2020
<6>CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
<6>CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<6>Machine model: Hisilicon HI3531D DEMO Board
<6>Memory policy: Data cache writealloc
<7>On node 0 totalpages: 138240
<7>free_area_init_node: node 0, pgdat 80822700, node_mem_map a17bf000
<7>  Normal zone: 1080 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 138240 pages, LIFO batch:31
<4>phy_mode = rgmii
<6>PERCPU: Embedded 9 pages/cpu @a17a0000 s6656 r8192 d22016 u36864
<7>pcpu-alloc: s6656 r8192 d22016 u36864 alloc=9*4096
<7>pcpu-alloc: [0] 0 [0] 1 
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 137160
<4>selected_console -1
<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Memory: 539080K/552960K available (6216K kernel code, 212K rwdata, 1604K rodata, 264K init, 290K bss, 13880K reserved, 0K highmem)
<6>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>Hierarchical RCU implementation.
<6>	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>NR_IRQS:16 nr_irqs:16 16
<6>sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>console [ttylog0] enabled
<6>Calibrating delay loop... 2786.91 BogoMIPS (lpj=13934592)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>CPU: Testing write buffer coherency: ok
<4>user heart init success
<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>Setting up static identity map for 0x405f0eb8 - 0x405f0f10
<4>L2C: DT/platform modifies aux control register: 0x72030001 -> 0x72430001
<4>L2C: DT/platform tries to modify or specify cache size
<6>L2C-310 enabling early BRESP for Cortex-A9
<3>L2C-310: enabling full line of zeros but not enabled in Cortex-A9
<6>L2C-310 ID prefetch enabled, offset 1 lines
<6>L2C-310 dynamic clock gating enabled, standby mode enabled
<6>L2C-310 cache controller enabled, 16 ways, 256 kB
<6>L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x76430001
<4>CPU1: Booted secondary processor
<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>Brought up 2 CPUs
<6>SMP: Total of 2 processors activated (5580.39 BogoMIPS).
<6>CPU: All CPU(s) started in SVC mode.
<6>devtmpfs: initialized
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<6>pinctrl core: initialized pinctrl subsystem
<6>regulator-dummy: no parameters
<6>NET: Registered protocol family 16
<6>DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>Serial: AMBA PL011 UART driver
<6>12080000.uart: ttyAMA0 at MMIO 0x12080000 (irq = 38, base_baud = 0) is a PL011 rev2
<4>uart-pl011 12090000.uart: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
<6>12090000.uart: ttyAMA1 at MMIO 0x12090000 (irq = 39, base_baud = 0) is a PL011 rev2
<4>uart-pl011 120a0000.uart: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
<6>120a0000.uart: ttyAMA2 at MMIO 0x120a0000 (irq = 40, base_baud = 0) is a PL011 rev2
<4>uart-pl011 12130000.uart: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
<6>12130000.uart: ttyAMA3 at MMIO 0x12130000 (irq = 52, base_baud = 0) is a PL011 rev2
<4>master mode , init pcie module
<3>Pcie port number: 0
<3>hisi_pcie_init->722pcie sys init failed!
<6>vgaarb: loaded
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>ssp-pl022 120d0000.spi: ARM PL022 driver, device ID: 0x00800022
<6>ssp-pl022 120d0000.spi: mapped registers from 0x120d0000 to fe8d0000
<4>ssp-pl022 120d0000.spi: Max speed that can be programmed is 25000000 Hz, you requested 40500000
<4>ssp-pl022 120d0000.spi: Max speed that can be programmed is 25000000 Hz, you requested 40500000
<4>ssp-pl022 120d0000.spi: Max speed that can be programmed is 25000000 Hz, you requested 40500000
<4>ssp-pl022 120d0000.spi: Max speed that can be programmed is 25000000 Hz, you requested 40500000
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Switched to clocksource timer00
<6>NET: Registered protocol family 2
<6>TCP established hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP: reno registered
<6>UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>PCI: CLS 0 bytes, default 64
<6>futex hash table entries: 512 (order: 3, 32768 bytes)
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>jffs2: version 2.2. (NAND) 짤 2001-2006 Red Hat, Inc.
<6>fuse init (API version 7.23)
<6>SGI XFS with security attributes, no debug enabled
<6>msgmni has been set to 1052
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>io scheduler cfq registered
<4>dh_proc has been probed successfully!
<6>pinctrl-single 120f0000.pinmux: 234 pins at pa fe8f0000 size 936
<6>brd: module loaded
<6>loop: module loaded
<6>ahci 11010000.sata: forcing port_map 0xf -> 0xe
<6>ahci 11010000.sata: SSS flag set, parallel bus scan disabled
<6>ahci 11010000.sata: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xe impl platform mode
<6>ahci 11010000.sata: flags: ncq sntf stag pm led clo only pmp fbs slum part ccc sxs boh 
<6>scsi host0: ahci_platform
<6>scsi host1: ahci_platform
<6>scsi host2: ahci_platform
<6>scsi host3: ahci_platform
<6>ata1: DUMMY
<6>ata2: SATA max UDMA/133 mmio [mem 0x11010000-0x11010fff] port 0x180 irq 49
<6>ata3: SATA max UDMA/133 mmio [mem 0x11010000-0x11010fff] port 0x200 irq 49
<6>ata4: SATA max UDMA/133 mmio [mem 0x11010000-0x11010fff] port 0x280 irq 49
<3>hisi-sfc hisi_spi_nor.0: unrecognized JEDEC id bytes: ff, c8, 21
<4>hisi-sfc hisi_spi_nor.0: spi nor register fail!
<4>hisi-sfc: probe of hisi_spi_nor.0 failed with error -2
<6>SPI Nand ID Table Version 2.4
<6>SPI Nand(cs 0) ID: 0xc8 0x21
<6>nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x21
<6>nand: GD/ESMT F50L1G41A
<6>nand: 128MiB, SLC, page size: 2048, OOB size: 64
<4>nand: NAND_ECC_NONE selected by board driver. This is not recommended!
<5>Creating 11 MTD partitions on "hinand":
<6>Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>libphy: hisi_gemac_mii_bus: probed
<4>hi_gmac_v200 100a0000.ethernet (unnamed net_device) (uninitialized): using random MAC address 7e:65:d0:26:4e:29
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: ATA-10: ST3000VX009-2AY10G, CV12, max UDMA/133
<6>ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (not used)
<6>ata2.00: configured for UDMA/133
<5>scsi 1:0:0:0: Direct-Access     ATA      ST3000VX009-2AY1 CV12 PQ: 0 ANSI: 5
<5>sd 1:0:0:0: Attached scsi generic sg0 type 0
<5>sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
<5>sd 1:0:0:0: [sda] 4096-byte physical blocks
<5>sd 1:0:0:0: [sda] Write Protect is off
<7>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<4>RTL8211 config ok
<6>attached PHY 3 to driver Generic PHY, PHY_ID=0x1cc916
<6>Higmac dma_sg_phy: 0x61240000
<6>ETH: rgmii, phy_addr=3
<6>PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered
<6>PPP Deflate Compression module registered
<6>NET: Registered protocol family 24
<6>xhci-hcd 11000000.xhci: xHCI Host Controller
<6>xhci-hcd 11000000.xhci: new USB bus registered, assigned bus number 1
<6>xhci-hcd 11000000.xhci: irq 54, io mem 0x11000000
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>xhci-hcd 11000000.xhci: xHCI Host Controller
<6>xhci-hcd 11000000.xhci: new USB bus registered, assigned bus number 2
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ehci-pci: EHCI PCI platform driver
<6>ehci-platform: EHCI generic platform driver
<6>ehci-platform 100c0000.ehci: EHCI Host Controller
<6>ehci-platform 100c0000.ehci: new USB bus registered, assigned bus number 3
<6>ehci-platform 100c0000.ehci: irq 51, io mem 0x100c0000
<6> sda: unknown partition table
<5>sd 1:0:0:0: [sda] Attached SCSI disk
<6>ehci-platform 100c0000.ehci: USB 2.0 started, EHCI 1.00
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-pci: OHCI PCI platform driver
<6>ohci-platform: OHCI generic platform driver
<6>ohci-platform 100b0000.ohci: Generic Platform OHCI controller
<6>ohci-platform 100b0000.ohci: new USB bus registered, assigned bus number 4
<6>ohci-platform 100b0000.ohci: irq 50, io mem 0x100b0000
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
<6>usbcore: registered new interface driver cdc_acm
<6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>usbcore: registered new interface driver usb-storage
<6>mousedev: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<5>hisi_i2c hisi_i2c.0: Hisilicon [i2c-0] probed!
<5>hisi_i2c hisi_i2c.1: Hisilicon [i2c-1] probed!
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>TCP: cubic registered
<6>NET: Registered protocol family 10
<6>mip6: Mobile IPv6
<6>ip6_gre: GRE over IPv6 tunneling driver
<6>NET: Registered protocol family 17
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<7>lib80211_crypt: registered algorithm 'WEP'
<7>lib80211_crypt: registered algorithm 'CCMP'
<7>lib80211_crypt: registered algorithm 'TKIP'
<5>Registering SWP/SWPB emulation handler
<6>usb 1-1: new high-speed USB device number 2 using xhci-hcd
<6>ata3: SATA link down (SStatus 0 SControl 300)
<6>usb-storage 1-1:1.0: USB Mass Storage device detected
<6>scsi host4: usb-storage 1-1:1.0
<6>ata4: SATA link down (SStatus 0 SControl 300)
<6>VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
<6>devtmpfs: mounted
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 264K (807ac000 - 807ee000)
<5>UBI: attaching mtd9 to ubi0
<5>UBI: scanning is finished
<5>UBI: attached mtd9 (name "config", size 10 MiB) to ubi0
<5>UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>UBI: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0
<5>UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>UBI: max/mean erase counter: 7415/5425, WL threshold: 4096, image sequence number: 0
<5>UBI: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 5
<5>UBI: background thread "ubi_bgt0d" started, PID 115
<5>UBIFS: background thread "ubifs_bgt0_0" started, PID 120
<5>UBIFS: recovery needed
<5>UBIFS: recovery completed
<5>UBIFS: mounted UBI device 0, volume 0, name "config"
<5>UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>UBIFS: FS size: 7745536 bytes (7 MiB, 61 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
<5>UBIFS: reserved for root: 365840 bytes (357 KiB)
<5>UBIFS: media format: w4/r0 (latest is w4/r0), UUID 349ACBFB-FB38-4B52-879B-45BBE14D7EE0, small LPT model
<5>scsi 4:0:0:0: Direct-Access     General  UDisk            5.00 PQ: 0 ANSI: 2
<5>sd 4:0:0:0: Attached scsi generic sg1 type 0
<5>sd 4:0:0:0: [sdb] 61440000 512-byte logical blocks: (31.4 GB/29.2 GiB)
<5>sd 4:0:0:0: [sdb] Write Protect is off
<7>sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
<3>sd 4:0:0:0: [sdb] No Caching mode page found
<3>sd 4:0:0:0: [sdb] Assuming drive cache: write through
<6> sdb:
<5>sd 4:0:0:0: [sdb] Attached SCSI removable disk
<4>[m
<4>
<4>[m
<6>OSA_logWrite entry OSA-DRV
<4>[0;32;32m[OSA-DRV@46096] OSA Build on Jan  6 2020 
<4>[m[0;32;32m[OSA-DRV@46096] SVN NUM: 46096.
<4>
<4>[m[0;32;32m[OSA-DRV@46096] Char device create OK !
<4>[m
<4>[0;35m[OSA-DRV@46096] Monitor    Task   pid=146   tid=146
<4>[m
<4>
<4>------------------------------------------------------------
<4> driverbox.ko SVN version:46800  build date: Thu, 09 Jan 2020 02:12:01 +0800
<4>------------------------------------------------------------
<4>[mNot find videochip hwid value
<4>[m[mNot find encodetype hwid value
<4>[m[mNot find audiochannel hwid value
<4>[m[mNot find screen_type hwid value
<4>[m[m##simvideo=4, digvideo=8, videochip=-1, encodetype=-1,audiochannel= -1,ivsnum= 0##
<4>[m[mProlicyTable[0] = 0
<4> [m[mProlicyTable[1] = 2
<4> [m[mProlicyTable[2] = 1
<4> [m[mProlicyTable[3] = 0
<4> [m[mProlicyTable[4] = 0
<4> [m[mProlicyTable[5] = 0
<4> [m[mProlicyTable[6] = 0
<4> [m[mProlicyTable[7] = 0
<4> [m[mProlicyTable[8] = 0
<4> [m[mProlicyTable[9] = 0
<4> [m
<6>OSA_logWrite entry DRVBOX
<4>[0;32;32m[DRVBOX@46800 ] Default product_pre_deal
<4>[m[msystem gpio infor:[m111110000[m
<4>[m[0;32;32m[DRVBOX@46800 ] our product ID: 0x04000598
<4>[m[0;32;32m[DRVBOX@46800 ] our board   ID: 0x0300002E
<4>[m[0;32;32m[DRVBOX@46800 ] our product Type: XVR5208AN-4KL-X 
<4>[m[0;32;32m[DRVBOX@46800 ] host_hwid_value:[0x004007e000046506][0x000412100000828d]
<4>[m[0;32;32m[DRVBOX@46800 ] NICE, This System Has No I2c SwitchChips.
<4>[m[0;32;32m[DRVBOX@46800 ] NICE, This System Has No Signal Selector.
<4>[m[mHisilicon Watchdog Timer: 0.01 initialized. default_margin=180 sec (nowayout= 1, nodeamon= 1)
<4>[m[0;32;32m[DRVBOX@46800 ] Total 0 spi bus registered
<4>[m[m[ExpComDriver]: NICE, This System Has No ExpandComs.
<4>[m[mThis Machine Has No Expand Coms.
<4>[m[mThis Machine Has No LCD devices.
<4>[m[m[INFRARED]: NICE, This Machine Doesn't Support INFRARED.
<4>[m[1;33m[DRVBOX@46800 ] WARN  (dh_misc_init_device|178): UNKONW TYPE. Using Default.
<4>[m[1;33m[DRVBOX@46800 ] WARN  (default_misc_init|66): Default default_misc_init
<4>[m[mNICE, The Kernel Supports BPA, But We Don't Use it.
<4>[m[mNICE, This System Has No EDMA FUNCTION.
<4>[m[1;33m[DRVBOX@46800 ] WARN  (plat_chip_init|68): System has no SOC CHIP module.
<4>[m[mNo TouchScreen
<4>[m[0;32;31m[DRVBOX@46800 ] ERROR  (dh_pwm_fan_init|286): dh_fan  resource init failed
<4>[m[0;32;32m[DRVBOX@46800 ] [MBUS]: NICE, This Machine Doesn't Support MBUS.
<4>[m[0;32;32m[DRVBOX@46800 ] [PSTN]: NICE, This Machine Doesn't Support PSTN.
<4>[m[0;32;32m[DRVBOX@46800 ] monitor num 0
<4>[m[1;33m[DRVBOX@46800 ] WARN  (rocker_init_dev|1410):  The Rocker res type is ROCKER_TYPE_UNKNOW!
<4>[m[1;33m[DRVBOX@46800 ] WARN  (touchkey_init_dev|514):  The Touchkey res type is TOUCHKEY_TYPE_UNKNOW!
<4>[m
<4>[0;32;32m[AVS] *****************************************************************************
<4>[m[0;32;32m[AVS] * avs version: V00.001 svn: 47055 Compile at: Sun, 19 Jan 2020 13:10:05 +0800 *
<4>[m[0;32;32m[AVS] *****************************************************************************
<4>[m[0;32;32m[AVS] Find product (id=0x4000598, cpu index=0).
<4>[m[0;32;32m[AVS] product resource found pstProductDev->enProduct：0x4000598,  CpuIndex:0.
<4>[m[0;32;32m[AVS] Begin to Alloc avs cfg mem!
<4>[m[0;32;32m[AVS] chip  resoure found.
<4>[m[0;32;32m[AVS] board  resoure found  enChip:11 .
<4>[m[0;32;32m[AVS] GlobVideoChNum:4 DspNum:0 ChipIndex:0 u32GlobDigtChNum:8,i32IsSuportExtra:0 u32MaxDecChNum:10 u32IvsChnNum: 0
<4>[m[0;32;32m[AVS] iSupConaxiAudio:1 NorAudioChnNum:1, GlobAudioChNum:4
<4>[m[0;32;32m[AVS] ChipIndex:[0], LocalAudioChNum:4, AudioCvi:4, AudioNor:1
<4>[m[0;32;32m[AVS] GetVdecVbPicBlkCnt enChnType:0 PlayBackBlkCnt:0 PreDecBlkCnt:0, s32BlkCnt:16
<4>[m[0;32;32m[AVS] GetVdecVbPicBlkCnt enChnType:1 PlayBackBlkCnt:0 PreDecBlkCnt:0, s32BlkCnt:16
<4>[m[0;32;32m[AVS] GetVdecVbPicBlkCnt enChnType:2 PlayBackBlkCnt:0 PreDecBlkCnt:0, s32BlkCnt:4
<4>[m[0;32;32m[AVS] GetVdecVbPMVBlkCnt enChnType:0 PlayBackBlkCnt:0 PreDecBlkCnt:0, s32BlkCnt:12
<4>[m[0;32;32m[AVS] GetVdecVbPMVBlkCnt enChnType:1 PlayBackBlkCnt:0 PreDecBlkCnt:0, s32BlkCnt:12
<4>[m[0;32;32m[AVS] GetVdecVbPMVBlkCnt enChnType:2 PlayBackBlkCnt:0 PreDecBlkCnt:0, s32BlkCnt:3
<4>[m[0;32;32m[AVS] backiva_vpss   start:33  
<4>[m[0;32;32m[AVS] vpss_vi_cnt:42  maxDec:10 
<4>[m[0;32;32m[AVS] 3531D u32PreviewNum:2 vct[vi:4 venc:4 ai:8 aenc8] vis:8 vencs:12 vpss:53 IVA_Total:9 
<4>[m[0;32;32m[AVS] Iva total count: 5
<4>[m[0;32;32m[AVS] Register_Init  modnum:0 
<4>[m[0;32;32m[AVS] Found the product, and init successfully.
<4>[m
<4>Module himedia: init ok
<6>Hisilicon Media Memory Zone Manager
<4>Add MMZ failed: PHYS(0x61C00000, 0x61BFFFFF), GFP=0, nBYTES=0KB,   NAME="decddr"
<4>hi_osal 1.0 init success!
<4>hi_base: module license 'Proprietary' taints kernel.
<4>Disabling lock debugging due to kernel taint
<4>load base.ko ... OK!
<4>load sys.ko ...OK!
<4>load vdec.ko ....OK!
<4>load vdh firmware.ko OK
<4>load jpegd.ko ....OK!
<4>load tde.ko ...OK!
<6>usb 4-1: new low-speed USB device number 2 using ohci-platform
<4>load region.ko ....OK!
<4>load vgs.ko ...OK!
<4>load viu.ko for ...OK!
<4>load vpss.ko ...OK!
<4>load vou.ko OK!
<4>load hifb.ko OK!
<4>load hdmi.ko OK!
<4>load rc.ko ...OK!
<4>load venc.ko ...OK!
<4>load chnl.ko ...OK!
<4>load vedu.ko ...OK!
<4>load h264e.ko ...OK!
<4>load h265e.ko ...OK!
<4>load jpege.ko ...OK!
<4>load vda.ko ....OK!
<4>load ive.ko ... OK!
<6>input: PixArt USB Optical Mouse as /devices/soc/100b0000.ohci/usb4/4-1/4-1:1.0/0003:093A:2510.0001/input/input0
<6>hid-generic 0003:093A:2510.0001: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-100b0000.ohci-1/input0
<4>load aio.ko OK!
<4>load ai.ko OK!
<4>load ao.ko OK!
<4>load aenc.ko OK!
<4>load adec.ko OK!
<4>
<4>******************************************************************************
<4>GENERAL: I2C_GEN Version: V0.00.01 Svn: 12696+ Compile at Dec  4 2017 14:36:03
<4>******************************************************************************
<4>unlocked_ioctl:7f5d4814 
<6>usbcore: registered new interface driver usbserial
<6>usbcore: registered new interface driver option
<6>usbserial: USB Serial support registered for GSM modem (1-port)
<4>RTL8192EU: module init start
<4>RTL8192EU: rtl8192eu v5.2.19_24763.20171030_COEX20170113-0046
<4>RTL8192EU: build time: Jan  5 2020 02:13:26, SvnVersion=41266
<4>RTL8192EU: rtl8192eu BT-Coex version = COEX20170113-0046
<4>RTL8192EU: rtw_inetaddr_notifier_register
<6>usbcore: registered new interface driver rtl8192eu
<4>RTL8192EU: module init ret=0
<4>rt5370sta: unknown parameter 'ifname' ignored
<4>rtusb init rt2870 --->
<6>usbcore: registered new interface driver rt2870
<4>[8811AU]: module init start
<4>RTL8811AU driver info:Complie time Jan  5 2020 02:12:49 SvnVersion = 40748
<4>[8811AU]: rtl8821au v5.2.6.3_25025.20171106_COEX20171103-6c6d
<4>[8811AU]: rtl8821au BT-Coex version = COEX20171103-6c6d
<6>usbcore: registered new interface driver rtl8821au
<4>[8811AU]: module init ret=0
<6>usbcore: registered new interface driver cdc_ether
<4>insmod dns_ops ok!
<6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<4>[m
<3>ioctl DH_GET_3G_RES called
<4>[m
<6>hi_gmac_v200 100a0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[0;32;32m[DRVBOX@46800 ] initing UART(2)
<4>[m[0;32;32m[DRVBOX@46800 ] initing UART(1)
<4>[m
<5>random: Challenge urandom read with 59 bits of entropy available
<4>[0;32;32m[DRVBOX@46800 ] initing UART(2)
<4>[m[0;32;32m[DRVBOX@46800 ] initing UART(1)
<4>[m[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x00049ecf
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x00049ed0
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x00049ed2
<4>[0;32;32m[AVS] AVS_TRANS_GET_CFG
<4>[m[0;32;32m[AVS] AVS_AVADDAS_GET_CFG.
<4>[m[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:8192 offset:0x00049f06
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:16384 offset:0x00049f0c
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:12288 offset:0x00049f10
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x00049eea
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x00049eec
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x00049eee
<4>[0;32;32m[AVS] display  GET CFGs.
<4>[m[0;32;32m[AVS] preview  GET CFGs.
<4>[m[0;32;32m[AVS] playback  GET CFGs.
<4>[m[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x00049ef0
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:12288 offset:0x00049f20
<4>[0;32;32m[AVS] AVS_MD_GET_CFG
<4>[m[0;32;32m[AVS] BD_GET CFGs.
<4>[m[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:12288 offset:0x00049f34
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:8192 offset:0x00049f3a
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x00049efb
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:32768 offset:0x00049f40
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:65536 offset:0x0004f0b0
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:57344 offset:0x0004f0c0
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:16384 offset:0x0004f0a8
<4>[0;32;32m[AVS] AVS_IVA_DRAW_GET_CFG
<4>[m[0;32;32m[AVS] AVS_IVA_DRAW_GET_CFG
<4>[m[m
<6>dh_watchdog_open
<4>[m[0;32;32m[DRVBOX@46800 ] Settint DefaultTimeout:180 seconds
<4>[m
<4>[m<3>ioctl DH_GET_3G_RES called
<4>[m
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<6>echo (666): drop_caches: 3
<6>echo (670): drop_caches: 3
<4>[0;32;32m[AVS] ivasnap  GET CFGs.
<4>[m
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<4>[0;32;32m[AVS] debug  GET bufInfo.
<4>[m[MmapAVS] size:4096 offset:0x000553ca
<6>usb 4-1: USB disconnect, device number 2
<6>usb 4-1: new low-speed USB device number 3 using ohci-platform
<6>input: PixArt USB Optical Mouse as /devices/soc/100b0000.ohci/usb4/4-1/4-1:1.0/0003:093A:2510.0002/input/input1
<6>hid-generic 0003:093A:2510.0002: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-100b0000.ohci-1/input0